Lenovo ThinkServer TS200 Hardware Maintenance Manual for TS200 - Page 276

Note: The EasyStartup program provides limited support for the IBM ServeRAID-BR10il v2 SAS/SATA Controller. You must use the LSI Configuration Utility to configure the disc array for this controller. However, after the disc arrays are configured, you can use the EasyStartup program to install the operating system and associated device driver. See "Using LSI Configuration Utility program" on page 262 for details. Typical operating system installation When you select Install operating system, you will be prompted for information required for the installation. The prompts vary depending on the operating system selected. This section describes the tasks associated with a typical Windows operating system installation. Each task must be completed in order before moving to the next task. Note: Ensure that your RAID controller is correctly configured before you select an operating system to install. • Select operating system: This task enables you to select the operating system that you will be installing. • Select disk: This task enables you to select the disk where you want to install the operating system. Note: The disk that you select must be set as the boot disk in UEFI. • Partitions options: This task enables you to choose whether you want to repartition the selected drive or use an existing partition. • Partition settings: This task enables you to choose the file system type and define the partition size. • Installation settings: This task prompts you for user and system settings, the operating system product key, and the administrator password. • Network settings: This task prompts you for domain and workgroup settings, Ethernet controller type, IP address settings, DNS settings, and WINS address settings. • Install applications: This task enables you to run custom commands or scripts at the end of the installation process. It also facilitates the installation of DVD-burning software and ThinkServer EasyManage software products. • Install Windows components: This task enables you to install optional Windows components such as IIS, ASP.NET, and SNMP. • Confirm settings: This task enables you to review all of the information you provided. • Save response file: This task gives you the option of saving the information on a diskette or USB device as a response file for future installations on similarly configured Lenovo servers. • Start installation: This task starts the actual installation process. First, the disk is prepared using the disk and partition information you specified. Then you are prompted to insert the operating system disk, and the operating system is installed using the information that you specified. Installing your operating system without using EasyStartup If you have already configured the server hardware and you are not using the EasyStartup program to install your operating system, do the following to download the latest operating-system installation instructions from the Lenovo Support Web site: Note: Changes are made periodically to the Lenovo Web site. The actual procedure might vary slightly from what is described in this document. 1. Go to http://www.lenovo.com/support. 2. Enter your product number (machine type and model number) or select Servers and Storage from the Select your product list. 3. From Family list, select ThinkServer TS200, and click Continue. 4. Select the operating system that you want from the Operating system list, and click Continue. 5. Click Operating system installation to download instructions to install the operating system. 268 Hardware Maintenance Manual