Lenovo ThinkServer TS200 Hardware Maintenance Manual for TS200 - Page 43

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. • SeeChapter 7 "Parts listing, TS200 Types 6522, 6523, 6524, 6525, 6526, 6528, 6529, and 6530" on page 209 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). • If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. A bus timeout has occurred Error on system %1.(%1 = CIM_ComputerSystem.ElementName) A bus timeout has occurred. 1. Remove the adapter from the PCI slot that is indicated by a lit LED. 2. Replace the extender card. 3. Remove all PCI adapters. 4. (Trained service technicians only) Replace the system board. The System %1 encountered Error a POST Error.(%1 = CIM_ComputerSystem.ElementName) A POST error has occurred.(Sensor = ABR Status) 1. Recover the server firmware from the backup page (see "Recovering the server firmware" on page 122). 2. Update the server firmware to the latest level. The System %1 encountered Error a POST Error.(%1 = CIM_ComputerSystem.ElementName) Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the code. A POST error has occurred.(Sensor = Firmware Error) 1. Update the server firmware on the primary page. Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the code. 2. (Trained service technician only) Replace the system board. Chapter 4. Diagnostics 35