Lenovo ThinkStation S10 User Manual - Page 150
microprocessor when installing it into the socket., To avoid damaging the microprocessor contacts
View all Lenovo ThinkStation S10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Notes: a. Note the orientation of the notches 1 on the microprocessor. This is important when reinstalling the microprocessor on the new system board. b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 6. Holding the microprocessor with your fingers, position the microprocessor so that the notches on the microprocessor are aligned with the tabs in the microprocessor socket. Important To avoid damaging the microprocessor contacts, do not tilt the microprocessor when installing it into the socket. 7. Lower the microprocessor straight down into the microprocessor socket of the system board. 8. Place the heat sink into position and replace the 4 screws to secure the heat sink to the system board. 9. Reconnect the heat sink fan cable. 10. Go to "Completing the FRU replacement" on page 158. 144 Hardware Maintenance Manual