Lenovo U330 U330 User Guide V1.0 - Page 39
To set a User Password, Password on boot, Enabled, Security, Enter, Enter New, Password
UPC - 884942333262
View all Lenovo U330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 2. Using Your Computer Note: Make sure the Password on boot is set to Enabled if you need the password protection at power on. To set a User Password: 1 Turn on your computer. Press F2, while the initial screen is displayed. The InsydeH20 Setup Utility screen opens. 2 Select Security, using the cursor directional keys. 3 Select Set User Password, and press the Enter key. The Set User Password window opens. 4 Choose your user password, which can be from two to eight alphanumeric characters in any combination. Type it in the Enter New Password field. 5 Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it. 6 Commit your password to memory, and press the Enter key. 7 Press F10 to exit. 8 Select Yes in the Exit Saving Changes window. 30