Lenovo Y410P Laptop User Guide - IdeaPad Y410p, Y510p - Page 35

Appendix. CRU instructions, Replacing the battery pack

Page 35 highlights

Appendix. CRU instructions Notes: • The illustrations used in this appendix are for the Lenovo IdeaPad Y510p, unless otherwise stated. • The following steps about upgrading and replacing devices are the same for the Y410p and Y510p. • Make sure the battery pack has been removed before replacing any devices. Replacing the battery pack Note: Use only the battery pack provided by Lenovo. Any other battery pack could ignite or explode. To replace the battery pack, do the following: 1 Turn off the computer. Disconnect the AC power adapter and all cables from the computer. 2 Close the computer display and turn the computer over. 3 Unlock the manual battery pack latch a . While holding the spring-loaded battery pack latch in the unlocked position b , remove the battery pack in the direction shown by the arrow c . $ & % 4 Install a fully charged battery pack. 5 Slide the manual battery pack latch to the locked position. 6 Turn the computer over again. 7 Connect the AC power adapter and the cables to the computer. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

31
Appendix. CRU instructions
Replacing the battery pack
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
To replace the battery pack, do the following:
1
Turn off the computer. Disconnect the AC power adapter and all cables from the computer.
2
Close the computer display and turn the computer over.
3
Unlock the manual battery pack latch
. While holding the spring-loaded battery pack
latch in the unlocked position
, remove the battery pack in the direction shown by the
arrow
.
4
Install a fully charged battery pack.
5
Slide the manual battery pack latch to the locked position.
6
Turn the computer over again.
7
Connect the AC power adapter and the cables to the computer.
Notes:
The illustrations used in this appendix are for the Lenovo IdeaPad Y510p, unless otherwise stated.
The following steps about upgrading and replacing devices are the same for the Y410p and Y510p.
Make sure the battery pack has been removed before replacing any devices.
Note:
Use only the battery pack provided by Lenovo. Any other battery pack could ignite or explode.
a
b
c