LevelOne FSW-1671 Manual - Page 20

Bandwidth Control

Get LevelOne FSW-1671 PDF manuals and user guides View all LevelOne FSW-1671 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Monitored Pckets: Pull down the selection menu to choose what kind of packet is to be monitored. Source Port: The ports that the user wants to monitor. All monitored port traffic will be copied to mirroring (destination) port. Users can select multiple source ports by ticking the check boxes beneath the port number label to be monitored. And then, click Update to have the configuration take effect. Take the following configuration as an example. (a) Source port: Port 1 ~ Port 4. (b) Destination Port: Port 9 ~Port 12. (c) Mirrored packet: Rx. This means all packets received at port 1 ~port 4 will be copied to port 9, port 10, port 11 and port 12.Care should be taken that the more source ports and destination ports is set, the lower network throughput is available for normal traffic. Bandwidth Control This page allows the setting of the bandwidth for each port. The Tx rate and Rx rate can be filled with the number ranging from 1 to 255. This number should be multiplied by the 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
16
°
Monitored Pckets:
Pull down the selection menu to choose what kind of packet is
to be monitored.
°
Source Port:
The ports that the user wants to monitor. All monitored port traffic will
be copied to mirroring (destination) port. Users can
select multiple source ports
by ticking the check boxes beneath the port number label to be monitored.
°
And then, click
Update
to have the configuration take effect.
Take the following configuration as an example.
(a) Source port: Port 1 ~ Port 4.
(b) Destination Port: Port 9 ~Port 12.
(c) Mirrored packet: Rx.
This means all packets received at port 1 ~port 4 will be copied to port 9, port 10, port 11
and port 12.Care should be taken that the more source ports and destination ports is set,
the lower network throughput is available for normal traffic.
Bandwidth Control
This page allows the setting of the bandwidth for each port. The Tx rate and Rx rate can
be filled with the number ranging from 1 to 255. This number should be multiplied by the