LevelOne FSW-1671 Manual - Page 23
d High bandwidth for RX, The limitation of the bandwidth control
View all LevelOne FSW-1671 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Example 3: The RX bandwidth number of the port 5~ port 8 is set to 50, 60, 70, 80 respectively, and Speed base is set to "low". The real bandwidth comes from the formula of 32Kbps*50, 32Kbps*60, 32Kbps*70 and 32Kbps*80 respectively After the "update" button is executed, the real bandwidth will show up in RX fields. (d) High bandwidth for RX Example 4: The RX bandwidth number of the port 5~ port 8 is set to 50, 60, 70, 80 respectively, and Speed base is set to "high". The real bandwidth comes from the formula of 32Kbps*50, 32Kbps*60, 32Kbps*70 and 32Kbps*80 respectively. After the "update" button is executed, the real bandwidth will show up in RX fields. The limitation of the bandwidth control • The actual bandwidth should be less than the cable link speed. For 100Mbps link speed, the bandwidth setting should be less than 196 if the bandwidth is set to "high". For 10Mbps link speed, the bandwidth setting should be less than 20 if the bandwidth base is set to "high". • Setting the bandwidth to "0" means no bandwidth control, it will run at the full speed. The warning message will shows up if bandwidth setting is higher than maximum rate (100Mbps). 19