LevelOne GEL-2460 Manual - Page 81
Linkage > Linkage Management
View all LevelOne GEL-2460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Chapter 8 Linkage Figure 8-17 Network Topology - Remote Switch Management (Batch Operation) The administrator wants to make the following configurations: 1) Change the passwords of all the other switches to the same new password. 2) Perform the MAC/Port binding operation for all the other switches. 3) Retrieve the configuration files of all the other switches. 4) Distribute the system settings of the SW254 to all the other switches. 2. Configuration Steps Step 1 Login to the SW254. Step 2 Go to the Linkage > Linkage Management page, and then click the Discover Switch bLevelOneon to discover other switches. In the Remote Switch Discovery List, select the Select All check box, enter the passwords of the SW251, SW252 and SW253 respectively (if they have the same password, you can directly enter the password in the Global Password text box), and then click the Batch Operate bLevelOneon to go to the batch management page to configure them. Step 3 Enter the new password in the Password and Confirm Password text boxes, and then click the Change Password bLevelOneon. Step 4 Click the Security Binding hyperlink, and then click the OK bLevelOneon in the confirmation dialog box. Step 5 Click the Retrieve Config hyperlink to retrieve the configuration files of the SW251, SW252 and SW253. Then you can view the retrieved configuration files in the Configuration File List, and click the Download bLevelOneon to download each configuration file to your local PC respectively. Step 6 Click the Distribute Config hyperlink to open the distribute configuration page. Select the Local Configuration File radio box, select Partially Override from the Distribution Mode drop-down list, select the System Settings check box, http://www.level1.com Page 74