LevelOne IES-1070 Manual - Page 7

Functional Description, Console Configuration

Get LevelOne IES-1070 PDF manuals and user guides View all LevelOne IES-1070 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Functional Description  Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment.  Manageable via SNMP, Web-based, Telnet, and RS-232 console port.  Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 1000Mbps-full-duplex; 10/100Mbps-full/half-duplex; Auto MDI/MDIX.  100Base-FX: Multi mode SC or ST type, Single mode SC or ST type. 100Base-BX: WDM Single mode SC type.  1000Base-SX/LX: Multi mode SC type, Single mode SC type. 1000Base-BX: WDM Single mode SC type.  Supports 8192 MAC addresses. Provides 2M bits memory buffer.  Store-and-forward mechanism.  Full wire-speed forwarding rate.  Alarms for power and port link failure by relay output.  Operating voltage and Max. current consumption: 0.92A @ 12VDC, 0.46A @ 24VDC, 0.23A @ 48VDC. Power consumption: 11W Max.  Power Supply: Redundant DC Terminal Block power inputs and 12VDC DC JACK with 100-240VAC external power supply.  Field Wiring Terminal Markings: Use Copper Conductors Only, 60/75℃, wire range 12-24 AWG, torque value 7 lb-in.  -10℃ to 60℃ (14℉ to 140℉) operating temperature range. Tested for functional operation @ -20℃ to 70℃ (-4℉ to 158℉). UL508 Industrial Control Equipment certified Maximum Surrounding Air Temperature @ 70℃ (158℉)  For use in Pollution Degree 2 Environment  Supports DIN-Rail and Panel Mounting installation Console Configuration  Connect to the switch console: Connect the DB9 straight cable to the RS-232 serial port of the device and the RS-232 serial port of the terminal or computer running the terminal emulation application. Direct access to the administration console is achieved by directly connecting a terminal or a PC equipped with a terminal-emulation program (such as HyperTerminal) to the switch console port.  Configuration settings of the terminal-emulation program: Baud rate: 115,200bps Data bits: 8 Parity: none Stop bit: 1 Flow control: none  Press the Enter key. The Command Line Interface (CLI) screen should appear as below:  Logon to Exec Mode (View Mode): ec Mode (or View Mode). > IES-1070 User Manual Page 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
IES-1070 User Manual
Page 7
Functional Description
Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial
environment.
Manageable via SNMP, Web-based, Telnet, and RS-232 console port.
Supports IEEE802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation:
1000Mbps-full-duplex; 10/100Mbps-full/half-duplex; Auto MDI/MDIX.
100Base-FX: Multi mode SC or ST type, Single mode SC or ST type. 100Base-BX: WDM
Single mode SC type.
1000Base-SX/LX: Multi mode SC type, Single mode SC type. 1000Base-BX: WDM Single
mode SC type.
Supports 8192 MAC addresses. Provides 2M bits memory buffer.
Store-and-forward mechanism.
Full wire-speed forwarding rate.
Alarms for power and port link failure by relay output.
Operating voltage and Max. current consumption: 0.92A @ 12VDC, 0.46A @ 24VDC,
0.23A @ 48VDC. Power consumption: 11W Max.
Power Supply: Redundant DC Terminal Block power inputs and 12VDC DC JACK with
100-240VAC external power supply.
Field Wiring Terminal Markings: Use Copper Conductors Only, 60/75
℃
, wire range
12-24 AWG, torque value 7 lb-in.
-10
℃
to 60
℃
(14
℉
to 140
℉
) operating temperature range. Tested for functional
operation @ -20
℃
to 70
℃
(-4
℉
to 158
℉
). UL508 Industrial Control Equipment certified
Maximum Surrounding Air Temperature @ 70
℃
(158
℉
)
For use in Pollution Degree 2 Environment
Supports DIN-Rail and Panel Mounting installation
Console Configuration
Connect to the switch console:
Connect the DB9 straight cable to the RS-232 serial port of the device and the RS-232
serial port of the terminal or computer running the terminal emulation application.
Direct access to the administration console is achieved by directly connecting a
terminal or a PC equipped with a terminal-emulation program (such as HyperTerminal)
to the switch console port.
Configuration settings of the terminal-emulation program:
Baud rate: 115,200bps
Data bits: 8
Parity: none
Stop bit: 1
Flow control: none
Press the
Enter
key. The Command Line Interface (CLI) screen should appear as below:
Logon to Exec Mode (View Mode):
ec
Mode (or View Mode).
>