LevelOne IES-1070 Manual - Page 83
Logon to Privileged Exec Mode Enable Mode.
View all LevelOne IES-1070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
WORD specifies the file name to be loaded to switch. 4. Example: The following example specifies upgrading firmware (file name: flash.tgz) from tftp server (IP address: 192.168.1.100) to switch: switch_a#install image 192.168.1.100 flash.tgz switch_a# Load config to TFTP server: 1. Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a# 2. Usage: Use write config-file command to backup configuration file to tftp server. 3. Command Syntax: write config-file IP-ADDRESS IP-ADDRESS specifies the IP address of tftp server. 4. Example: The following example backups configuration file to tftp server (IP address: 192.168.1.100): switch_a#write config-file 192.168.1.100 switch_a# Save Configuration: 1. Command Mode: Privileged Exec mode Logon to Privileged Exec Mode (Enable Mode). The switch_a# prompt will show on the screen. switch_a# 2. Usage: Use copy running-config startup-config command to write configurations to the file to be used at startup. This is the same as the write memory command. 3. Command Syntax: copy running-config startup-config 4. Example: The following example specifies writing configurations to the file to be used at startup to switch: IES-1070 User Manual Page 83