LevelOne KVM-0410 Manual - Page 12
Change Configuration while Running
View all LevelOne KVM-0410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
LevelOne plus 8 more computers directly connect to the Master (to "PC A"~"PC H"), see figure 13. LevelOne will update this change the next time it is activated. Note: Any new device must be turned off before it is connected to the Master. Figure 13: All 16-port KVM Switches in cascade For OSD menu: After connection completes, you should re-activate the OSD menu to check if the Master recognizes the Slaves. A triangle mark (!) is placed to the right of the channel name indicating the port is connected to a Slave not a computer. A number to the left of the triangle mark indicates the Slave model, i.e. 8! for an 8-port Switch. Change Configuration while Running A device (a computer or a KVM Switch) at any 'PC x' port can be changed at any time after initial power-up. If you change any one of the "PC 1" to "PC 8" ports connection from a computer to a Slave KVM switch or vice versa, or replace the devices of a port; the OSD 21 22