LevelOne WAP-6202 User Manual - Page 14

Logging to the Device

Get LevelOne WAP-6202 PDF manuals and user guides View all LevelOne WAP-6202 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Pinging 192.168.1.253 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.1.253: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), If the Ping command is successful, the connection between the computer and the Device is working properly. If the Ping command fails, please do the following: 1） Check physical connection: Verify that the LAN LED on the Device and the LED on your computer's network card are lit. 2）Check TCP/IP settings: Verify that your computer is on the same subnet as the Device's LAN interface. E.g., if the Device's LAN IP address is 192.168.1.253 (default), the computer's IP address must be an unused IP address in the 192.168.1.0/24 subnet. Logging to the Device No matter what operating system is installed on your computer, such as, MS Windows, Macintosh, UNIX, or Linux, and so on, you can configure the Device through the Web browser (e.g., Internet Explorer, Firefox). To login to the Device, do the following: Launch a Web browser, enter the Device's LAN IP address (default is 192.168.1.253) in the address bar, and then press Enter, as shown in Figure 3-1.。 Figure 3-1 Entering IP address in the Address Bar The login window appears, as shown in Figure 3-2. The first time you login to the Device, you should enter the default login information (default user name and password both are admin), and then click OK. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
13
If the Ping command is successful, the
connection between the computer and the Device is
working properly. If the Ping command fails, please do the following:
1
）
Check physical connection:
Verify that the LAN LED on the Device and the LED on your
computer’s network card are lit.
2
）
Check TCP/IP settings:
Verify that your computer is on the same subnet as the Device’s LAN
interface. E.g., if the Device’s LAN IP address is 192.168.1.253 (default), the computer’s IP
address must be an unused IP address in the 192.168.1.0/24 subnet.
Logging to the Device
No matter what operating system is installed on your computer, such as, MS Windows, Macintosh,
UNIX, or Linux, and so on, you can configure the Device through the Web browser (e.g., Internet
Explorer, Firefox).
To login to the Device, do
the following:
Launch a Web browser, enter the Device’s LAN IP
address
(default is
192.168.1.253
) in the address bar, and then press
Enter
, as shown in Figure
3-1.
。
Figure 3
-
1
Entering IP address in the Address Bar
The login window appears, as shown in Figure 3-2. The first time you login to the Device, you
should enter the default login information (default user name and password both are
admin
), and
then click
OK
.
Pinging 192.168.1.253 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.1.253:
Packets:
Sent = 4, Received = 0, Lost = 4 (100% loss),