LevelOne WGR-6012 Manual - Page 35
WPA/WPA2, authenticate, Wireless Client List
View all LevelOne WGR-6012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
WPA/WPA2 Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. RADIUS Server The router will detect automatically which Security type(WPA-PSK version 1 or 2) the client uses to encrypt. IP address or the 802.1X server‟s domain-name. Select RADIUS Shared Key If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2...8, 9, A, B...F) digits If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. Wireless Client List 35
35
WPA/WPA2
Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user
must
authenticate
to this router first to use the Network service. RADIUS Server
The router will detect automatically
which Security type(WPA-PSK version 1 or 2) the client
uses to encrypt.
IP address or the 802.1X server‟s domain
-name.
Select RADIUS Shared Key
If you select HEX, you have to fill in
64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits
If ASCII, the length of Pre-share key is from 8 to 63.
Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the
RADIUS server.
Wireless Client List