Lexmark 20K1100 User's Reference - Page 157
PostScript Menu, Universal, Setup, Priority, Image, Smoothing
UPC - 734646641005
View all Lexmark 20K1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Using printer menus Menu Item Universal Setup Purpose Values To determine the default size when the Paper Size setting for a tray is Universal. 1 Select a unit of measure. Inches* (* Denotes a country/regionspecific factory default value) Millimeters* 2 Select the values. Portrait Width =3.00-14.17 in. (8.5 in.*) in increments of 0.01 in. =76-360 mm (216 mm*) in increments of 1 mm Portrait Height =3.00-14.17 in. (14.17 in.*) in increments of 0.01 in. =76-360 mm (360 mm*) in increments of 1 mm Feed Direction =Short Edge* =Long Edge PostScript Menu Use the PostScript Menu to change printer settings that only affect jobs using the PostScript emulation printer language. Note: Values marked by an asterisk (*) are the factory default settings. Menu Item Font Priority Image Smoothing Purpose To establish the font search order. Note: Font Priority is only displayed when a formatted flash or hard disk is installed, is neither defective nor Read/Write or Write protected, and Job Buffer Size is not set to 100%. Values Resident* Flash/Disk To enhance the contrast and Off* sharpness of low resolution bitmapped images (such as images downloaded from the On World Wide Web) and smooth their color transitions. Note: Image Smoothing has no effect on images that are 300 dpi or higher resolution. Printer searches printer memory for the requested font before searching flash memory or hard disk. Printer searches the hard disk and flash memory for the requested font before searching printer memory. Uses default resolution when printing all images. Enhances low resolution images, such as graphics with a resolution of 72 dpi. PostScript Menu 157