Lexmark 20K1100 User's Reference - Page 47
Using the media support in the output bin
UPC - 734646641005
View all Lexmark 20K1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Media specifications Using the media support in the output bin Use the media support so a stack of media does not skew in the output bin. To use the media support: 1 Grasp the edge of the media support at the indentation in the output bin. 2 Lift the media support. Pull the tab on the bottom of the media support forward until it snaps into place. 3 Lower the media support into place so that it is now at an angle due to the tab. Tab Media support Indentation The media support is inclined so your stacked media now remains in a neater stack in the output bin. Note: Do not leave the media support inclined if you are printing transparencies. Using the media support in the output bin 47
Using the media support in the output bin
47
Media specifications
Using the media support in the output bin
Use the media support so a stack of media does not skew in the output bin. To use the media
support:
1
Grasp the edge of the media support at the indentation in the output bin.
2
Lift the media support. Pull the tab on the bottom of the media support forward until it
snaps
into place.
3
Lower the media support into place so that it is now at an angle due to the tab.
The media support is inclined so your stacked media now remains in a neater stack in the output bin.
Note:
Do not leave the media support inclined if you are printing transparencies.
Indentation
Tab
Media support