Lexmark 3200 Setup Guide - Page 27
Step4: Install the scanner - drivers
UPC - 734646383127
View all Lexmark 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Step 4: Install the scanner 1 Open the scanner box and then remove all items from the box except the scanner. 2 Make sure you have the following items: • Scanner • Paper tray • Y-line power cord • Power adapter • Scanner cable • Setup Guide • Drivers CD • Pad assembly (store for later use, not used during setup) 3 Place all items except the scanner aside for later use. 4 Remove the scanner from the box and place it on a flat, level surface. 5 Locate the lock switch on the bottom of the scanner. 6 Push the switch up to the unlocked position. 7 Place the scanner on the scanner shelf. 8 Insert two thumbscrews attached to the bottom of the scanner shelf into the bottom of the scanner and tighten securely. Install the scanner 23
23
Install the scanner
Step 4: Install the scanner
1
Open the scanner box and then remove all items from the box
except the scanner.
2
Make sure you have the following items:
•
Scanner
•
Paper tray
•
Y-line power cord
•
Power adapter
•
Scanner cable
•
Setup Guide
•
Drivers CD
•
Pad assembly (store for later use, not used during setup)
3
Place all items except the scanner aside for later use.
4
Remove the scanner from the box and place it on a flat, level
surface.
5
Locate the lock switch on the bottom of the scanner.
6
Push the switch up to the unlocked position.
7
Place the scanner on the scanner shelf.
8
Insert two thumbscrews attached to the bottom of the scanner
shelf into the bottom of the scanner and tighten securely.