Lexmark 33S0300 Technical Reference - Page 318
Setting Up the Communications Port Using Windows 2000
![]() |
UPC - 734646013284
View all Lexmark 33S0300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
8-4 Interfaces Setting Up the Communications Port Using Windows 2000 In your Windows 2000 application: 1 On the Menu bar, click Start. 2 Click Settings. 3 Click Control Panel. The Control Panel screen appears. 4 Double-click the System icon. The System Properties screen appears. 5 Select the Hardware tab. 6 In the Device Manager area of the Hardware tab screen, click the Device Manager button. The Device Manager screen appears. 7 Scroll down to Ports and click the + once to expand the list of available Ports. 8 Select the communications port you want to configure and double-click. The Communications Port Properties screen for this specific port displays. For example, if you select the COM1 port, then the Communications Port [COM1] Properties screen displays. 9 Click the Port Settings tab. 10 Fill out the fields for the following printer settings to make them match your printer settings: • Bits per second • Data bits • Parity • Stop bits • Flow Control Note: For Flow Control, select Hardware if you want DTR protocol or Xon/ Xoff for Xon/Xoff protocol. 11 Click OK. 12 Close all windows now that the port is set up.
![](/manual_guide/products/lexmark-33s0408-technical-reference-5a81aa4/318.png)