Lexmark 33S0300 Technical Reference - Page 67
Table 2-16, Control Continued, Character Text Path Direction
UPC - 734646013284
View all Lexmark 33S0300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
2-55 PCL Table 2-16: Page Control (Continued) Command / Parameters ESC&f#W [custom name] # = number of bytes in the custom name l ESC& #O 0 Portrait (Default) 1 Landscape 2 Reverse Portrait 3 Reverse Landscape ESC&a#P # = Degrees (0, 90, 180, 270) Default = 0 ESC&c#T 0 Horizontal Printing -1 Vertical Rotated Printing ESC&a#L # = Column Default = 0 ESC&a#M # = Column Default = Logical Page Width ESC9 l ESC& #E # = number of lines Default = 3 (1/2 inch) l ESC& 1T l ESC& #F # = number of lines Default = 60 or 64 (Country specific) Function / Result Set Universal Custom Name Sets the user-specified custom name for the Universal paper size being used. Select Orientation Specifies the position of the logical page with respect to the physical page. Note: This setting resets margins, the number of printable lines per page, and the cursor position. Print Direction Rotates the coordinate system counter-clockwise in 90° increments with respect to the current orientation. Note: Margins are not rotated or cleared. Character Text Path Direction Vertically rotates text for use in vertical writing, such as printing Japanese text. Set Left Margin Sets the left margin to the left edge of the designated column. Note: The column width is defined by the space character of the active font and the Horizontal Motion Index (HMI). Set Right Margin Sets the right margin to the right edge of the designated column. Note: The column width is defined by the space character of the active font and the HMI. Clear Horizontal Margins Clears left and right margins. Set Top Margin Sets the number of lines between the top of the physical page and first line of print. Line height is determined by the current Vertical Motion Index (VMI) and/or line spacing value. Note: Setting a top margin of 0 results in the first line of text falling outside of the printable area. Job Separation This command is parsed and ignored. Set Text Length Sets the bottom margin length in lines, measured from the first line of the page. Text Length equals Logical Page Length -1 inch (-1/2 inch for top and -1/2 inch for bottom).