Lexmark B2865 Users Guide PDF - Page 76
WEP Authentication Mode, Set WEP Key, WPA2/WPA Personal, Set Pre, Shared Key, 1x Encryption Mode
View all Lexmark B2865 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Understanding the printer menus 76 Menu item WEP Authentication Mode Auto* Open Shared Set WEP Key WPA2/WPA Personal AES Set Pre‑Shared Key WPA2-Personal AES 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off Enable DHCPv6 On Off* Stateless Address Autoconfiguration On* Off DNS Server Address Manually Assigned IPv6 Address Manually Assigned IPv6 Router Address Prefix All IPv6 Addresses All IPv6 Router Addresses Description Set the type of Wireless Encryption Protocol (WEP) for the printer. Note: This menu item appears only when the Wireless Security Mode is set to WEP. Specify a WEP password for secure Wi‑Fi connection. Enable Wi‑Fi security through Wi-Fi Protected Access (WPA). Note: This menu item appears only when the Wireless Security Mode is set to WPA2/WPA-Personal. Set the password for secure Wi‑Fi connection. Enable Wi‑Fi security through WPA2. Note: This menu item appears only when the Wireless Security Mode is set to WPA2-Personal. Enable Wi‑Fi security through 802.1x standard. Notes: • This menu item appears only when the Wireless Security Mode is set to 802.1x - RADIUS. • 802.1x - RADIUS can be configured only from the Embedded Web Server. Enable Dynamic Host Configuration Protocol (DHCP) and configure static IP address. Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information dynamically to clients. Enable and configure IPv6 settings in the printer.