Lexmark BDX5495HSN3 User's Guide - Page 153
Cannot print from digital camera using PictBridge
UPC - 836367004401
View all Lexmark BDX5495HSN3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Cannot print from digital camera using PictBridge These are possible solutions. Try one or more of the following: ENABLE PICTBRIDGE PRINTING FROM CAMERA Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see the digital camera documentation. MAKE SURE THE CAMERA IS A PICTBRIDGE-ENABLED DIGITAL CAMERA 1 Disconnect the camera. 2 Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera documentation to determine whether it is PictBridge-enabled. CHECK USB CABLE Use only the USB cable that came with the camera. REMOVE MEMORY CARDS Remove any memory cards from the printer. CHECK MESSAGES If an error message appears on the display, see "Error messages on the computer screen" on page 177. Partial 4 x 6 in. (10 x 15 cm) photo prints when using a PictBridge-enabled digital camera MAKE SURE PHOTO SIZE AND PAPER SIZE ARE SET CORRECTLY The printer displays the Paper/Photo Size Error when your chosen photo size does not match the paper size that is set. This typically happens when you are trying to print from your PictBridge-enabled digital camera. You may have left the printer control panel Photo Size menu item setting at 8.5 x 11 in. or 5 x 7 in. size, but your camera has a print size of 4 x 6 in. or L. You need to make sure your chosen photo size on the printer is 4 x 6 in. or 10 x 15 cm, depending on the typically used photo size for your country or region. • Make sure the 4 x 6 in. (10 x 15 cm) photo paper is loaded correctly in the paper support. • If your camera lets you change the print size setting, change the print size selection to 4 x 6 in. (10 x 15 cm) on the PictBridge-enabled digital camera. • If your camera does not allow you to change the paper size setting, use the control panel to change the paper size to 4 x 6 in. (10 x 15 cm). 1 Insert the USB cable that came with your camera to the camera, and insert the other end into the PictBridge port on the front of the printer. 2 Turn the camera on, and choose your first photo using the camera control panel. 3 Wait for PictBridge Printing to appear on the display of the printer control panel. Note: If Paper/Photo Size Error appears, press to clear the error message. Troubleshooting 153