Lexmark BDX5495HSN3 User's Guide - Page 162
Scan was not successful, Scanning takes too long or freezes the computer, Printer, Productivity Studio
UPC - 836367004401
View all Lexmark BDX5495HSN3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
3 Click Printer. • Make sure no check mark appears next to Pause Printing. • If a check mark does appear next to Set As Default Printer, you must select the print queue device for each file you want to print. REMOVING AND REINSTALLING THE SOFTWARE For more information, see "Removing and reinstalling the software" on page 132. Scan was not successful These are possible solutions. Try one or more of the following: CHECK USB CABLE CONNECTION 1 Check the USB cable for any obvious damage. 2 Firmly plug the square end of the USB cable into the back of the printer. 3 Firmly plug the rectangular end of the USB cable into the USB port of the computer. The USB port is marked with the USB symbol. RESTART COMPUTER Turn off and then restart your computer. Scanning takes too long or freezes the computer These are possible solutions. Try one or more of the following: CLOSE OTHER SOFTWARE Close all programs not being used. CHANGE THE SCANNING RESOLUTION TO A LOWER VALUE 1 Load an original document facedown on the scanner glass. 2 From the desktop, double-click the Productivity Studio icon. 3 From the Welcome Screen, click Scan. 4 Click Custom Settings. 5 From the Scan Resolution drop-down list, select a lower scan resolution. 6 Click Start. Troubleshooting 162