Lexmark C736dtn User's Guide - Page 177
Paper trays, Solving 2, 000-sheet drawer problems, OPTION, SELECTED, PAPER, LOADED, CORRECTLY, PRINTER
View all Lexmark C736dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
MAKE SURE THE OPTION IS SELECTED From the program you are using, select the option. Mac OS 9 users should make sure the printer is set up in the Chooser. Paper trays These are possible solutions. Try one or more of the following: MAKE SURE THE PAPER IS LOADED CORRECTLY 1 Open the paper tray. 2 Check for paper jams or misfeeds. 3 Make sure paper guides are aligned against the edges of the paper. 4 Make sure the paper tray closes properly. RESET THE PRINTER Turn the printer off, wait about 10 seconds, and then turn the printer on. MAKE SURE THE PAPER TRAY IS INSTALLED CORRECTLY If the paper tray is listed on the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Reinstall the paper tray. For more information, see the hardware setup documentation that came with the paper tray, or go to http://support.lexmark.com to view the paper tray instruction sheet. Solving 2,000-sheet drawer problems Try one or more of the following: THE ELEVATOR TRAY IS NOT WORKING PROPERLY • Make sure the printer is properly connected to the 2,000-sheet drawer. • Make sure the printer is turned on. • Make sure that the power cord is plugged firmly into the back of the 2,000-sheet drawer. • If the tray is empty, then load paper in the tray. • Clear any jams. THE PAPER FEED ROLLERS DO NOT TURN TO ADVANCE PAPER • Make sure the printer is properly connected to the 2,000-sheet drawer. • Make sure the printer is turned on. THE PAPER CONSISTENTLY JAMS IN THE DRAWER • Flex the paper. • Make sure the drawer is properly installed. • Make sure paper is loaded correctly. Troubleshooting 177