Lexmark C736dtn User's Guide - Page 187
Repeating Defects, Darkness, Brightness, Contrast, Settings, Paper, Absorbed, Moisture, Humidity
View all Lexmark C736dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
CHECK THE DARKNESS, BRIGHTNESS, AND CONTRAST SETTINGS The Toner Darkness setting is too light, the RGB Brightness setting is too light, or the RGB Contrast setting is too low. • Change these settings from the printer control panel Quality menu. • For Windows users, change these settings from Print Properties. • For Macintosh users, change these settings from the Print dialog and pop-up menus. THE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY Load paper from a fresh package. CHECK THE PAPER Avoid textured paper with rough finishes. CHECK THE PAPER TYPE AND WEIGHT SETTINGS Make sure the paper type and weight settings match the paper loaded in the tray: 1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings. 2 Before sending the job to print, specify the correct type setting: • For Windows users, specify the type from Print Properties. • For Macintosh users, specify the type from the Print dialog. COLOR SAVER MAY BE SET TO ON Turn Color Saver off in the printer control panel Quality menu. THE TONER MAY BE LOW Replace the toner cartridge. THE TONER CARTRIDGE MAY BE WORN OR DEFECTIVE Replace the toner cartridge. Repeating defects These are possible solutions. Try one or more of the following: Troubleshooting 187