Lexmark C736dtn User's Guide - Page 39
Installing the printer on a wireless network (Macintosh), Prepare to con the printer
View all Lexmark C736dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
7 Temporarily connect a USB cable between the computer on the wireless network and the printer. Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you can print wirelessly. 8 Follow the instructions on the computer screen to complete the software installation. Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your installation. 9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and step 8 for each computer. Installing the printer on a wireless network (Macintosh) Prepare to configure the printer 1 Locate the printer MAC address on the sheet that came with the printer. Write the last six digits of the MAC address in the space provided below: MAC address 2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the printer on. Enter the printer information 1 Access the AirPort options. Additional printer setup 39