Lexmark C748 User's Guide - Page 35

Additional printer setup 35 c Press Enter, or click OK. 2 Select the printer. 3 Right‑click the printer, and then select Properties. 4 Click the Configuration tab. 5 Click Update Now ‑ Ask Printer or manually add any installed hardware options under Configuration Options. 6 Click Apply. For Macintosh users In Mac OS X version 10.5 or later 1 From the Apple menu, navigate to: System Preferences > Print & Fax > select your printer > Options & Supplies > Driver 2 Add any installed hardware options, and then click OK. In Mac OS X version 10.4 1 From the Finder, navigate to: Go > Applications > Utilities 2 Double‑click Printer Setup Utility or Print Center. 3 Select the printer. 4 From the Printers menu, choose Show Info. 5 Add any installed hardware options, and then click Apply Changes. Networking Note: A Service Set Identifier (SSID) is a name assigned to a wireless network. Wireless Encryption Protocol (WEP), Wi-Fi Protected Access (WPA), and WPA2 (Wi-Fi Protected Access 2) are types of security used on a network. Preparing to set up the printer on a wireless network Note: Do not connect the installation or network cables until prompted to do so by the setup software. Make sure you have the following information before setting up the printer on a wireless network: • SSID-The SSID is also referred to as the network name. • Wireless Mode (or Network Mode)-The mode will be either infrastructure or ad hoc. • Channel (for ad hoc networks)-The channel defaults to automatic for infrastructure networks. Some ad hoc networks will also require the automatic setting. Check with your system support person if you are not sure which channel to select.