Lexmark C750 User's Guide - Page 44
Protect, Setup Menu, Paper Size, Paper, Paper Menu, Setup Guide - printer driver
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Symptom Cause Solution Jobs do not print (continued). You are using the wrong printer driver or are printing to a file. • Verify that you selected the printer driver associated with the Lexmark C750. • If you are using a USB port, make sure you are running Windows 98/Me or Windows 2000, and using a Windows 98/Me or Windows 2000 compatible printer driver. Your MarkNet™ print server is not set up properly or is not connected properly. Verify that you have properly configured the printer for network printing. Refer to the drivers CD or to Lexmark's Web site for information. You are using the wrong interface cable, or the cable is not securely connected. Make sure you are using a recommended interface cable. Refer to the Setup Guide for cable specifications. Held jobs do not print. A formatting error has occurred. The printer has insufficient memory. • Print the job. (Only part of the job may print.) • Delete the job. • Free up additional printer memory by scrolling through the list of held jobs and deleting others you have sent to the printer. The printer has received invalid data. Delete the job. Job takes longer than The job is too complex. expected to print. Reduce the complexity of your print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job. Page Protect is set to On. Set Page Protect to Off from the Setup Menu. 1 Press Menu until you see Setup Menu, and then press Select. 2 Press Menu until you see Page Protect, and then press Select. 3 Press Menu until you see Off, and then press Select. Job prints from the wrong tray or on the wrong paper or specialty media. Printer driver settings are overriding the operator panel menu settings. Make sure the Paper Size and Paper Type specified in the printer driver are correct for the job you are printing. Incorrect characters print. You are using an incompatible parallel cable. If you are using a parallel interface, make sure you are using an IEEE 1284-compliant parallel cable. We recommend Lexmark part number 1329605 (10 ft) or 1427498 (20 ft) for the standard parallel port. The printer is in Hex Trace mode. If Ready Hex appears on the display, you must exit Hex Trace mode before you can print your job. Turn the printer off and back on to exit Hex Trace mode. Tray linking does not Tray linking is not configured work. properly. To configure the linked trays: • Make sure the Tray x Type value in the Paper Type menu item in the Paper Menu is the same for all linked trays. • Make sure the Tray x Size value in the Paper Size menu item in the Paper Menu is the same for all linked trays. 42