Lexmark C750 User's Guide - Page 64
Removing a firmware card, Remove the system board access cover. See
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3 Gently pull the three posts on the hard disk mounting plate out of the holes on the system board. 4 Gently pull the ribbon cable connector out of the connector on the system board. 5 Place the disk in its original packaging, or wrap the disk in paper and store it in a box. 6 Replace the system board access cover. See Reinstalling the system board access cover. Removing a firmware card Complete the following steps to remove a firmware card. If an option card has been installed, you must remove it before removing the firmware card. See Removing an option card. WARNING: Optional firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch an optional firmware card. 1 Remove the system board access cover. See Accessing the printer system board. 2 Grasp the firmware card gently and pull it straight out in one motion. Do not pull one side and then the other. 3 Place the card in its original packaging, or wrap the card in paper and store it in a box. 4 Replace the system board access cover. See Reinstalling the system board access cover. 62