Lexmark C760 User Reference - Page 88
Std Parallel Port, Standard USB Port
View all Lexmark C760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Message What this message means What you can do 54 Network Software Error 54 Std Network Software Error The printer cannot establish communications with an installed network port. • Press Go to clear the message and continue printing. The job may not print correctly. • Program new firmware for the network interface by way of the parallel port. • Press Menu to open the Job Menu and reset the printer. 54 Std Par ENA Connection Lost 54 Par ENA Connection Lost The printer has lost the connection to an external print server (also called an external network adapter or ENA). • Make sure the cable connecting the ENA and the printer is securely attached. Turn the printer off and then on to reset the printer. • Press Go to clear the message. The printer erases any reference to the ENA and then resets. 55 Unsupported Option in Slot 55 Unsupported Flash in Slot An unsupported option card is installed in one of the ports or an unsupported flash DIMM is installed in a memory slot. Turn off and unplug the printer. Remove the unsupported option. Plug in the printer and turn it on. See Removing memory and option cards for help. 56 Serial Port Disabled 56 Standard Serial Disabled Data has been sent to the printer through a serial port, but the serial port is disabled. • Press Go to clear the message. The printer discards any data received through the serial port. • Make sure the Serial Buffer menu item in the Serial Menu is not set to Disabled. See also: Serial Buffer 56 Parallel Port Disabled 56 Std Parallel Port Disabled Data has been sent to the printer through a parallel port, but the parallel port is disabled. • Press Go to clear the message. The printer discards any data received through the parallel port. • Make sure the Parallel Buffer menu item in the Parallel Menu is not set to Disabled. See also: Parallel Buffer 56 USB Port Disabled 56 Standard USB Port Disabled Data has been sent to the printer through a USB port, but the USB port is disabled. • Press Go to clear the message. The printer discards any data received through the USB port. • Make sure the USB Buffer menu item in the USB Menu is not set to Disabled. See also: USB Buffer 58 Input Config Error Either too many drawers with matching trays are attached to the printer or the input configuration is invalid. (For example, a duplex unit is not installed directly underneath the printer, but under a tray instead.) Turn off and unplug the printer. Remove the additional drawers or reconfigure the offending option. Plug in the printer and turn it on. See also: Setup Guide 58 Output Config Error Too many output options have been attached to the printer. Turn off and unplug the printer. Remove the additional output option(s). Plug in the printer and turn it on. See also: Setup Guide 88