Lexmark C760 Service Manual - Page 20
Options and features, High performance, Print quality, Heavy volume reliability
View all Lexmark C760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
5060-4xx Options and features Lexmark C76x paper handling options support the Lexmark C750/C752/C76x printers, however the color of the covers do not match the C750 and C752 models. The C76x envelope drawer is not compatible with the C750. Note: Do not use Lexmark C750/C752 options on the Lexmark C76x printers. • 500-Sheet drawer - (includes 500-sheet tray and support unit) installs beneath the printer and holds approximately 500 sheets of 20 lb, 75 g/m2 paper. Up to three drawers are supported simultaneously, or an option drawer and high-capacity input tray. All models of Lexmark C76x. • 500-Sheet tray - tray for special media temporarily replaces the standard tray in a 500-sheet drawer and holds approximately 500 sheets of 20 lb, 75 g/m2 paper. All models of Lexmark C76x. • Duplex option - offers two-side printing. The first option under a duplex option must be a 500-sheet drawer. All models of Lexmark C76x. • 2,000-Sheet drawer (HCIT) - installs beneath the printer and below any other optional input sources and holds approximately 2,000 sheets of 20 lb, 75 g/m2 paper. Models 421 and 422. • Output expander - installs above the printer primary output bin to offer an additional output destination. This holds approximately 650 sheets of 20 lb, 75 g/m2 paper. Only one output option above the printer is supported. Models 421 and 422. • 5-Bin mailbox - installs above the printer primary output bin to offer five output destinations in one option. Each of the five bins supports approximately 100 pages of 20 lb, 75 g/m2 paper. Only one output option above the printer is supported. Models 421 and 422. • Finisher - offers stapling, hole punching, offset stacking and an additional output bin. Two models are available, a short and a tall one. Hole punching for 2-, 3-, or 4-hole left-edge is available. The single staple position is the upper left corner. The finisher supports up to 3,000 sheets of non-stapled, non-punched media. For stapled media, the output bin supports up to 90 stapled sets or 2,700 sheets. The stapler staples a maximum of 30 sheets per set. Each printer supports one finisher. Models 421 and 422. • Envelope drawer - installs beneath the printer, and holds approximately 60 envelopes (20 lb, 75 g/m2). Up to three envelope drawer are supported or one envelope drawer and a high-capacity input tray. Models 421 and 422. • Outdoor media drawer - installs beneath the printer and holds up to 100 sheets of outdoor media suitable for outdoor use. Models 421 and 422 only. • Banner tray - extension allows printing of banner-width paper. Models 421 and 422 only. High performance • Up to 25 ppm black or color • 500 MHz RISC processor (non-network) or 600 MHz (network) • 128MB RAM • Time to first page - Black: less than 13 seconds - Color: less than 15 seconds Print quality 1200 x 1200 dpi and 4800 CQ. Heavy volume reliability • Up to 4,000-page average monthly duty cycle • Up to 60,000-page maximum duty cycle based on a single month usage 1-2 Service Manual