Lexmark CS421 Users Guide PDF - Page 71
Ethernet, PCL SmartSwitch, Job Buffering, Mac Binary PS, Notes, Network Speed
View all Lexmark CS421 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Understanding the printer menus 71 Menu item PCL SmartSwitch Off On* PS SmartSwitch Off On* Job Buffering On Off* Mac Binary PS Auto* On Off Description Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Temporarily store print jobs in the printer hard disk before printing. Note: This menu item appears only when a hard disk is installed. Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Ethernet Menu item Description Network Speed Show the speed of an active network adapter. IPv4 Enable DHCP On* Off Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to dynamically distribute IP addressing and configuration information to clients. IPv4 Set Static IP Address IP Address Netmask Gateway Set the static IP address of your printer. IPv6 Enable IPv6 Off On* Enable IPv6 in the printer. IPv6 Enable DHCPv6 Off* On Enable DHCPv6 in the printer. Note: An asterisk (*) next to a value indicates the factory default setting.