Lexmark CX735 Users Guide - Page 259
Warning-Potential, Damage, Troubleshoot a problem
View all Lexmark CX735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Troubleshoot a problem Error codes 31.35 31.40, 31.41, 31.42, 31.43 31.60 259 Error message Solution Reinstall missing or unresponsive waste toner bottle. 1 Open door B. 2 Remove the waste toner bottle. Note: To avoid spilling the toner, place the bottle in an upright position. 3 Insert the waste toner bottle. 4 Close door B. Reinstall missing or unresponsive [color] cartridge. 1 Open door B. 2 Remove the cartridge. 3 Insert the cartridge. 4 Close door B. Reinstall missing or unresponsive black imaging unit. 1 Open door B. 2 Remove the waste toner bottle. Note: To avoid spilling the toner, place the bottle in an upright position. 3 Remove the toner cartridges. 4 Disconnect the imaging kit cable. 5 Remove the imaging kit. Note: To avoid scratching the imaging kit or damaging the photoconductor drum, place the imaging kit in an uplifted position. 6 Remove the black imaging unit. Warning-Potential Damage: Do not expose the photoconductor unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. Warning-Potential Damage: Do not touch the shiny photoconductor drum under the imaging unit. Doing so may affect the quality of future print jobs. 7 Insert the black imaging unit. 8 Insert the imaging kit. 9 Connect the imaging kit cable. 10 Insert the toner cartridges. 11 Insert the waste toner bottle. 12 Close door B.