Lexmark CX735 Users Guide - Page 308
Paper feed problems, Envelope seals when printing
View all Lexmark CX735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Troubleshoot a problem 308 All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components. Warning-Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts may not be covered by the warranty. To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer, touch and hold the error message on the display using two fingers for 15 seconds. When a confirmation dialog box appears, touch Continue. If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part. For more information, see "Using genuine Lexmark parts and supplies" on page 201. If the printer does not print after clearing the error message, then reset the supply usage counter. 1 From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. 2 Select the part or supply that you want to reset, and then touch Start. 3 Read the warning message, and then touch Continue. 4 Using two fingers, touch the display for 15 seconds to clear the message. Note: If you are unable to reset the supply usage counters, then return the supply item to the place of purchase. Paper feed problems Envelope seals when printing Action Step 1 a Use an envelope that has been stored in a dry environment. Note: Printing on envelopes with high moisture content can seal the flaps. b Send the print job. Yes Go to step 2. No The problem is solved. Does the envelope seal when printing? Step 2 a Make sure that paper type is set to Envelope. From the home screen, touch Settings > Paper > Tray Configuration > Paper Size/Type. b Send the print job. Contact customer The problem is support. solved. Does the envelope seal when printing?