Lexmark CX735 Users Guide - Page 32
Setting up the fax function using etherFAX, Using the Settings menu in the printer
View all Lexmark CX735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Set up, install, and configure 32 Using the Settings menu in the printer 1 From the home screen, touch Settings > Fax > Fax Setup > General Fax Settings. 2 Configure the settings. Using the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Fax Setup > General Fax Settings. 3 Configure the settings. 4 Apply the changes. Setting up the fax function using etherFAX Notes: • The printer firmware must be updated to the latest version. For more information, see "Updating firmware" on page 53. • An appropriate license bundle must be installed in your printer. For more information, contact etherFAX. • Make sure that you have registered your printer to the etherFAX portal. For more information, go to https://www.etherfax.net/lexmark. • The printer serial number is required on registration. To locate the serial number, see "Finding the printer serial number" on page 10. 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > Fax > Fax Setup > General Fax Settings. Note: Fax Setup appears only if Fax Mode is set to Fax. 3 In the Fax Name field, type a unique name. 4 In the Fax Number field, enter the fax number that etherFAX provided. 5 From the Fax Transport menu, select etherFAX. Notes: • This menu shows up only when more than one fax transport is available. • If the printer only has etherFAX installed, then it is automatically configured. 6 Apply the changes.