Lexmark CX942 Users Guide - Page 218
Print Configuration, Device Operations, Toner patch sensor setup, Automatically Display Error Screens
View all Lexmark CX942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Use printer menus 218 Menu item Description Print Configuration Font Sharpening 0-150 (24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Device Operations Quiet Mode Off* On Set the printer to operate in Quiet Mode. Note: Enabling this setting slows down the overall performance of the printer. Device Operations Panel Menus Off On* Enable access to the printer menus from the control panel. Device Operations Safe Mode Off* On Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues. For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing. Device Operations Minimum Copy Memory 80 MB* 100 MB Set the minimum memory allocation for storing copy jobs. Device Operations Clear Custom Status Erase user‑defined strings for the Default or Alternate custom messages. Device Operations Clear all remotely‑installed messages Erase messages that were remotely installed. Device Operations Automatically Display Error Screens Off On* Show existing error messages on the display after the printer remains inactive on the home screen for a length of time. Device Operations Honor orientation on fast path copy Off* On Enable the printer to use the orientation setting under the Copy menu when sending quick copy jobs. Toner patch sensor setup Calibration frequency preference Disabled Fewest color adjustments Fewer color adjustments Normal* Better color accuracy Best color accuracy Set the printer to put down the correct amount of toner to maintain color consistency. Note: An asterisk (*) next to a value indicates the factory default setting.