Lexmark CX942 Users Guide - Page 53
Setting the fax date and time, Configuring daylight saving time, Configuring the fax speaker settings
![]() |
View all Lexmark CX942 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Set up, install, and configure 53 Setting the fax date and time 1 From the home screen, touch Settings > Device > Preferences > Date and Time > Configure. 2 Configure the settings. Configuring daylight saving time 1 From the home screen, touch Settings > Device > Preferences > Date and Time > Configure. 2 In the Time Zone menu, touch (UTC+user) Custom. 3 In the Configure menu, touch UTC Offset. 4 Configure the settings. Configuring the fax speaker settings 1 From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings. 2 Do the following: • Set the Speaker Mode to Always On. • Set the Speaker Volume to High. • Activate the Ringer Volume. Configuring the e‑mail SMTP settings Configure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through e-mail. The settings vary with each e‑mail service provider. Before you begin, make sure that the printer is connected to a network and that the network is connected to the Internet. Using the Embedded Web Server 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Settings > E‑mail. 3 From the E‑mail Setup section, configure the settings. Notes: • For more information on the password, see the list of e‑mail service providers. • For e‑mail service providers that are not on the list, contact your provider and ask for the settings. 4 Click Save.
![](/manual_guide/products/lexmark-cx942-users-guide-c9f5eef/53.png)