Lexmark E220 Service Manual - Page 123

Problem Vertical or horizontal streaks appear on the page. 4500 Action For E320/E322 models only, run engine clean cycle to remove any toner that may have accumulated. See "Execute engine clean cycle " on page 3-13 (E320/E322) for more information. Replace the print cartridge. Toner smears or rubs off the page. The print is getting light but the Toner Low light is not on. • For E320/E322 models only, run engine clean cycle to remove any toner that may have accumulated. See "Execute engine clean cycle " on page 3-13 for more information. • Check fuser temperature. Replace if necessary. • Try a different kind of paper. Paper designed for copiers gives the best quality. • If you are printing on special media, such as card stock or labels, be sure you select the correct paper type in the printer driver. • Change the media texture setting. If the setting is not in your driver, you can download the correct Lexmark setup utility from the Lexmark Web site at www.lexmark.com. • The Toner Low light does not come on if the standard 1,500 page print cartridge is installed. • Remove the print cartridge and gently shake it from side to side to redistribute the toner. • Replace the print cartridge. Diagnostic information 2-93