Lexmark E220 Service Manual - Page 182
Removal procedures, Cover removals
View all Lexmark E220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
4500 Removal procedures Be sure to unplug the power cord whenever you are working on the printer with one of the covers removed. Be sure to remove the print cartridge before you perform removal procedures. Cover removals Access cover 1. Open the front access cover. 2. Press the center of the access cover down to release the side pivot points. 3. Remove the access cover. Front cover 1. Open the front cover. 2. Remove the two plastic clips from the front cover support arm hinges. Note: Support and ease the charge roll assembly into a resting position when disengaging the front cover support arm hinges. 3. Disengage the front cover support arm hinges from the charge roll assembly. 4. Release the front cover from its pivot points. Note: Lay the front cover to one side as the operator panel cable is attached to the controller card. See "Right side cover" on page 4-5 and "Controller card cage removal" on page 4-7 for more information. Top cover 1. Open the front cover. 2. Remove the two top cover screws. 3. Remove the top cover. 4-4 Service Manual