Lexmark E450DN User's Guide - Page 56

Solving print quality problems, Problem, Action - photoconductor replacement

Get Lexmark E450DN - E 450dn B/W Laser Printer PDF manuals and user guides View all Lexmark E450DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Troubleshooting Solving print quality problems The information in the following table may help you solve print quality problems. If these suggestions still do not correct the problem, call for service. You may have a printer part that requires adjustment or replacement. Problem Print is too light. Action • The toner may be low. • Change the Toner Darkness setting in the Quality menu. • Change the Brightness setting in the Quality menu. • Change the Contrast setting in the Quality menu. • If you are printing on an uneven print surface, change the Paper Weight and Paper Texture settings in the Paper menu. • Verify the correct print media is being used. Toner smears, or print comes off the page. • If you are printing on an uneven print surface, change the Paper Weight and Paper Texture settings in the Paper menu. • Verify the print media is within the printer specifications. See Understanding print media guidelines on page 12 for more details. If the problem continues, contact the Lexmark Customer Support Center at http://support.lexmark.com. Toner appears on the back of Toner is on the transfer roll. To help prevent this, do not load print media that is smaller the printed page. than the page size of the job to be printed. Open and close the printer top front cover to run the printer setup cycle. Toner fog or background • Check the photoconductor kit to make sure it is installed correctly. shading appears on the page. • Replace the photoconductor kit. Solving print quality problems 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
Solving print quality problems
56
Troubleshooting
Solving print quality problems
The information in the following table may help you solve print quality problems. If these suggestions still do not correct the
problem, call for service. You may have a printer part that requires adjustment or replacement.
Problem
Action
Print is too light.
•
The toner may be low.
•
Change the
Toner Darkness
setting in the Quality menu.
•
Change the
Brightness
setting in the Quality menu.
•
Change the
Contrast
setting in the Quality menu.
•
If you are printing on an uneven print surface, change the Paper Weight and Paper
Texture settings in the Paper menu.
•
Verify the correct print media is being used.
Toner smears, or print comes
off the page.
•
If you are printing on an uneven print surface, change the Paper Weight and Paper
Texture settings in the Paper menu.
•
Verify the print media is within the printer specifications. See
Understanding print
media guidelines on page 12
for more details.
If the problem continues, contact the Lexmark Customer Support Center at
.
Toner appears on the back of
the printed page.
Toner is on the transfer roll. To help prevent this, do not load print media that is smaller
than the page size of the job to be printed.
Open and close the printer top front cover to run the printer setup cycle.
Toner fog or background
shading appears on the page.
•
Check the photoconductor kit to make sure it is installed correctly.
•
Replace the photoconductor kit.