Lexmark MB3442 Users Guide PDF - Page 80
Advanced Imaging, Admin Controls, Color Balance, Contrast, Background Removal, Scan Edge to Edge
![]() |
View all Lexmark MB3442 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Use printer menus 80 Advanced Imaging Menu item Description Color Balance Cyan ‑ Red ‑4 to 4 (0*) Magenta ‑ Green ‑4 to 4 (0*) Yellow ‑ Blue ‑4 to 4 (0*) Contrast Best for Content* 0 1 2 3 4 5 Adjust the amount of toner used for each color. Set the contrast of the output. Background Removal Level ‑4 to 4 (0*) Scan Edge to Edge On Off* Adjust the amount of background visible on a scanned image. Allow edge‑to‑edge scanning of the original document. Note: An asterisk (*) next to a value indicates the factory default setting. Admin Controls Menu item Description Automatic Redial 0-9 (5*) Adjust the number of redial attempts based on the activity levels of recipient fax machines. Redial Frequency 1-200 minutes (3*) Increase the time between redial attempts to increase the chance of sending fax successfully. Enable ECM On* Off Activate Error Correction Mode (ECM) for fax jobs. Note: ECM detects and corrects errors in the fax transmission process that are caused by telephone line noise and poor signal strength. Enable Fax Scans On* Off Fax documents that are scanned at the printer. Driver to Fax On* Off Allow the print driver to send fax. Note: An asterisk (*) next to a value indicates the factory default setting.
![](/manual_guide/products/lexmark-mb3442-users-guide-pdf-8f8a60c/80.png)