Lexmark MS510 Forms and Bar Code Card Technical Reference Guide - Page 34
Bar code descriptor for QR, Bar code descriptor for MaxiCode data
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Y Ratio: Truncated: Rows: Columns: Aspect Ratio X: Aspect Ratio Y: ECC By Percentage: Fixed at 3 Specified by #s4 parameter Specified by #b1 parameter Specified by #b2 parameter Specified by #s1 parameter Specified by #s2 parameter Fixed at 0 Bar code descriptor for QR Functional parameters for QR (HP compatibility mode) Typeface Esc (s#T P parameter Esc(s#P Default 0 B parameter 10 Esc(s#B S parameter 0 Esc(s#S 24860T Model 1 24861T Model 2 Optional Determines ECC level as follows: • 0 = Default ECC level (error correction level M of 15%) • 1 = Low ECC/High Density level (L), 7% damage allowed. • 2 = Standard ECC level (M), 15% damage allowed. • 3 = High reliability/ECC level (Q), 25% damage allowed. • 4 = Ultra High reliability/ECC level (H), 30% damage allowed. Optional Specifies module height (and width) in dots (1/600 inch). Minimum value is 1. Optional Determines encoding mode as follows: • 0 = Use default (Automatic: JIS/ShiftJIS) • 1 = Numeric (0-9) • 2 = Alphanumeric (0-9; uppercase A-Z; space; and the symbols and :) • 3 = JIS 8-bit character set • 4 = Kanji character set (shifted JIS) Bar code descriptor for MaxiCode data The data sent when using this technique for printing MaxiCode symbols follows the same rules that exist for data sent using the Lexmark Transfer Bar Code Data command to print MaxiCode symbols, with the following change to rule 1: The input data must start with a label-number field, a number-of-labels field, and a mode field. The three fields are one digit in length and are terminated with either a comma or group separator (GS, ASCII 29). Two-dimensional bar codes 34