Lexmark MS510 Forms and Bar Code Card Technical Reference Guide - Page 62
Bytes, Range, Default if not, specified, Definition, Note
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Bytes 4-5 6-7 8-9 10-15 MSB X dimension byte 1 (in units) Y dimension byte 1 (in units) Rows Reserved LSB Range X dimension 240-12000 (dec) byte 2 (in units) Y dimension byte 2 (in units) 480-60000 (dec) Note: The range of Y dimension is dependent on the value of X dimension, such that Min=2 * X-dimension Max=5 * X-dimension Columns Rows: 4-44 (dec) Columns: 1-4 (dec) - - Default (if not specified) Definition 945 (dec) 03 1 (hex) Optional Sets the X dimension of the module (white or black rectangle) in 100th of an inch. Note: Values that go beyond the defined range are appropriately clipped and set to the minimum and maximum values. To set the X dimension to default at 600 dpi requires a value of 9.45, which is specified as 945 (dec) or 03 B1 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 03 and B1 (hex). 1890 (dec) 07 62 (hex) Optional Note: The range of values of the Y dimension is between 2 to 5 times the values of the X dimension. Any value beyond that range will be clipped appropriately and set to the minimum and maximum values. Sets the Y dimension of the module (white or black rectangle) in 100th of an inch. The default width of this element from the bar code engine is twice that of the X dimension. To set the Y dimension to default at 600 dpi requires a value of 18.9, which is specified as 1890 (dec) or 07 62 (hex). The Units enumeration will be set to 02 or 00 (hex), and these two bytes will be 07 and 62 (hex). If not specified, the Y dimension will become double that of the X dimension. 0 (dec) 00 (hex) Optional Manually set the number of symbol rows. Automatic operation is specified by using 0. Manually set the number of symbol columns. Automatic operation is specified by using 0. - - Bar code descriptor for MicroPDF417 62