Lexmark MS725 Users Guide PDF - Page 102

Maintaining the printer 102 Using the Push Button method 1 From the control panel, navigate to: Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start Push Button Method 2 Follow the instructions on the display. Using the personal identification number (PIN) method 1 From the control panel, navigate to: Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start PIN Method 2 Copy the eight‑digit WPS PIN. 3 Open a Web browser, and then type the IP address of your access point in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 4 Access the WPS settings. For more information, see the documentation that came with your access point. 5 Enter the eight‑digit PIN, and then save the changes. Deactivating the Wi‑Fi network 1 From the printer control panel, navigate to: Settings > Network/Ports > Network Overview > Active Adapter > Standard Networking For non-touch-screen printer models, press 2 Follow the instructions on the display. to navigate through the settings. Changing the printer port settings after installing an internal solutions port Notes: • If the printer has a static IP address, then do not change the configuration. • If the computers are configured to use the network name instead of an IP address, then do not change the configuration. • If you are adding a wireless internal solutions port (ISP) to a printer previously configured for an Ethernet connection, then disconnect the printer from the Ethernet network. For Windows users 1 Open the printers folder. 2 From the shortcut menu of the printer with the new ISP, open the printer properties. 3 Configure the port from the list.