Lexmark MS810 Quick Reference - Page 26

Open the stapler door., Press the staples against the metal bracket.

Page 26 highlights

2 Open the stapler door. 4 Use the metal tab to lift the staple guard, and then remove any loose staples. 6 Press the staples against the metal bracket. 3 Pull down the latch of the staple cartridge holder, and then pull the holder out of the printer. 5 Press down the staple guard until it clicks into place. Note: If the staples are at the rear of the cartridge, then shake the cartridge downward to bring the staples near the metal bracket. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

2
Open the stapler door.
3
Pull down the latch of the staple cartridge holder, and then pull the
holder out of the printer.
4
Use the metal tab to lift the staple guard, and then remove any
loose staples.
5
Press down the staple guard until it
clicks
into place.
6
Press the staples against the metal bracket.
Note:
If the staples are at the rear of the cartridge, then shake
the cartridge downward to bring the staples near the metal
bracket.
26