Lexmark MX6500e 6500e Quick Reference - Page 15
There are different ways of loading letterhead depending
View all Lexmark MX6500e 6500e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
• Flex the stack of envelopes back and forth to loosen them. Straighten the edges on a level surface. • Load envelopes with the flap side down and on the left of the multipurpose feeder. EXECB5 A 4 LTR A5 4 Prepare the paper or specialty media for loading. • Flex sheets of paper back and forth to loosen them. Do not fold or crease the paper. Straighten the edges on a level surface. • Hold transparencies by the edges. Straighten the edges on a level surface. 5 Load the paper or specialty media. Note: Slide the stack gently into the multipurpose feeder until it comes to a stop. • Load only one size and type of paper or specialty media at a time. • Make sure the paper fits loosely in the multipurpose feeder, lies flat, and is not bent or wrinkled. • There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not. Without an optional staple finisher With an optional staple finisher ABC ABC One‑sided printing ABC One‑sided printing Warning-Potential Damage: Never use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. These envelopes may severely damage the printer. B 5 C E X E 5 A A 4 R LT Note: Avoid touching the printable side of the transparencies. Be careful not to scratch them. Two‑sided (duplex) printing Two‑sided (duplex) printing 15