Lexmark MX912 User's Guide - Page 108

Faxing 108 Customizing fax settings Changing the fax resolution 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: Fax > enter the fax number > Options 4 From the Resolution area, touch the arrows to select the resolution you want. Note: Select a resolution from Standard (fastest speed) to Ultra Fine (best quality at a reduced speed). 5 Touch Fax It. Making a fax lighter or darker 1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass. Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light comes on when the paper is loaded properly. 2 If you are loading a document into the ADF tray, then adjust the paper guides. 3 From the home screen, navigate to: Fax > enter the fax number > Options 4 Adjust the fax darkness, and then touch Fax It. Viewing a fax log 1 Type the printer IP address into the address field of your Web browser. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. 2 Click Reports. 3 Click Fax Job Log or Fax Call Log. Blocking junk faxes 1 Open a Web browser, and then type the printer IP address in the address field.