Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 109

Understanding MFP messages Message Meaning Action Replace jammed originals if restarting job. One or more messages that interrupted a scan job are now cleared. Replace the original documents in the scanner to restart the scan job. Touch Restart job if page level recovery is active and the job is restartable. The message clears. A new scan job containing the same parameters as the previous job starts. Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and clears the message. Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the last successfully scanned page. Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP. Scan Document Too Long The scan job exceeds the maximum number of pages. Note: The scanner finishes scanning current pages in the ADF, but data is lost when the job cancels itself after reaching the maximum number of pages. Touch Continue to clear the message. Touch Cancel Job to clear the message if the job is restartable. Touch Restart job if the job is restartable. The message clears, and a new scan job containing the same parameters as the previous job starts. Scanner ADF Cover Open The scanner automatic document feed cover is open. The message clears when the cover is closed. Scanner locked, release The scanner carriage lock is lock under scanner engaged. Release the lock under the scanner. Touch Continue. Scanner registration Scanner registration is successful. successfully completed Touch Continue to clear the message. Unsupported USB device, The front USB contains a device or please remove hub that is not recognized. Remove unrecognized hub or device to continue. Unsupported USB hub, please remove A USB hub in the front USB is not recognized. Remove the unrecognized device to continue and clear the message. 1565 Emul error, load emulation option The download emulator contained in the firmware card does not function with the MFP firmware. Note: The MFP automatically clears the message in 30 seconds and then disables the download emulator on the firmware card. For help downloading the correct download emulator version, contact the place where you bought your printer. 30.yy Invalid refill, change cartridge The MFP detects a refilled Lexmark Cartridge Return Program print cartridge. Install a new print cartridge to clear the message. Attendance messages 109