Lexmark Multifunction Laser C77x - Menus and Messages Guide - Page 59
Enables Error Correction Mode for fax, Duplex, Bind on right, left scroll
View all Lexmark Multifunction Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Using the MFP menus Menu item Duplex Content Darkness Purpose Values and descriptions Sets duplex scanning (two-sided scanning) either on or off for outgoing fax jobs. Off* Long edge The fax job is not set for duplex printing. The long end of the page (left edge is for portrait orientation and top edge for landscape orientation). See Duplex Bind on page 76 for more information. Short edge The short edge of the page (top edge for portrait orientation and left edge for landscape orientation). See Duplex Bind on page 76 for more information. Specifies the type of content contained Text* in the fax job. The fax job contains mostly text or line art. Text/Photo The fax job contains a mixture of text and images. Photo The fax job contains only images. Specifies the level of darkness for the 1-9 (5*) fax job. A graphic representation depicts the values. As the right or left scroll button is touched, the asterisk moves back and forth on the line. 1 is next to the - and 9 is next to the +. As shown, 5 is the current value. - + Dial Prefix Automatic Redial Redial Frequency Behind a PABX Enable ECM Enable Fax Scans Driver to Fax A numeric entry field is provided to enter numbers. The previously entered numbers are shown. The dial prefix could be a country code or a code businesses use to dial an outside line. Number string Specifies the number of times the MFP automatically tries to send the fax job again by resubmitting the Fax To number. 0-9 (5*) Select a range in minutes for the 1-200 (3*) number of redials to occur in that time span. Enables or disables switchboard blind Yes dialing without a dial tone. No* Enables Error Correction Mode for fax Yes* jobs, which makes faxing more reliable. No Allows sending faxes by scanning at On* the MFP. Off Allows driver to fax jobs to be sent by On* the MFP. Off The entry field is limited to 16 characters. Text entry characters are limited to: 0-9 and a space. Do not wait for a dial tone. Wait for a dial tone. ECM is enabled. ECM is disabled. Fax scans are enabled. Fax scans are disabled. Driver to fax jobs can be sent. Driver to fax jobs cannot be sent. Driver to fax jobs are treated like PostScript jobs. Settings 59