Lexmark Optra S Service Manual - Page 123
Print Quality - Background, quality by increasing the transfer setting.
View all Lexmark Optra S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
4059-XXX FRU 7 Lines spaced 49.74 mm (1.958 inch) apart 8 Lines spaced 51.02 mm (2.009 inch) apart 9 Lines spaced 52.23 mm (2.056 inch) apart 10 Lines spaced 76.53 mm (3.013 inch) apart 11 Lines spaced 95.66 mm (3.766 inch) apart 12 Lines spaced 99.49 mm (3.917 inch) apart 13 Lines spaced 114.79 mm (4.519 inch) apart Action Replace the FRUs in the following order: redrive assembly fuser assembly Replace the transfer roll. Replace the redrive assembly. Replace the FRUs in the following order: alignment assembly main drive gearbox assembly Replace the FRUs in the following order: toner cartridge main drive gearbox assembly Replace the redrive assembly. Replace the alignment assembly. Print Quality - Background Service Tip: Some background problems can be caused by rough papers or non-Lexmark toner cartridges. If the rough paper mode is on, turn it off and run the print test. Some slick or coated papers may also cause background. Some problems occur with printers that run a large amount of graphics in a humid environment. The customer may try to improve the print quality by increasing the transfer setting. Diagnostic Information 2-96