Lexmark Optra T User's Guide (2 MB) - Page 97
At entry into the envelope feeder, Adjust the envelope edge guide if needed.
![]() |
View all Lexmark Optra T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
At entry into the envelope feeder Since the envelope feeder feeds envelopes from the bottom of the stack, the envelope on the bottom is jammed. 1 Slide the attached envelope weight up. 2 Flip the envelope weight over and back toward the printer. 3 Remove the stack of envelopes from the envelope feeder. 4 Pull the jammed envelope straight out toward you. 5 Replace the stack of envelopes in the envelope feeder. 6 Adjust the envelope edge guide if needed. 7 Rotate the envelope weight and lower it to the stack. NOTE: If you perform the above steps and envelope jams continue to occur, feeding a single envelope between steps 4 and 5 may correct the problem. Clearing Jams 97
![](/manual_guide/products/lexmark-optra-t-users-guide-2-mb-7376690/97.png)
97
Clearing Jams
At entry into the envelope feeder
Since the envelope feeder feeds envelopes from the bottom of the
stack, the envelope on the bottom is jammed.
1
Slide the attached envelope weight up.
2
Flip the envelope weight over and back toward the printer.
3
Remove the stack of envelopes from the envelope feeder.
4
Pull the jammed envelope straight out toward you.
5
Replace the stack of envelopes in the envelope feeder.
6
Adjust the envelope edge guide if needed.
7
Rotate the envelope weight and lower it to the stack.
N
OTE
:
If you perform the above steps and envelope jams continue
to occur, feeding a single envelope between steps 4 and 5
may correct the problem.