Lexmark T630 User's Reference - Page 121
Before removing jams, Recommended paper, Storing print media
UPC - 734646385756
View all Lexmark T630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Before removing jams • Flex, fan, and straighten print media before you load it. If jams do occur with print media, try feeding one sheet at a time through the multipurpose feeder. • Do not use print media that you have cut or trimmed yourself. • Do not mix print media sizes, weights, or types in the same print media source. • Use only recommended print media. See Recommended paper. • Make sure the recommended print side is face down when loading all trays for simplex printing. • Make sure the recommended print side is face up when loading the multipurpose feeder. • Keep print media stored in an acceptable environment. See Storing print media. • Do not remove trays during a print job. • Push all trays in firmly after loading them. • Make sure the guides in the trays are properly positioned for the size of print media you have loaded. Make sure the guides are not placed too tightly against the stack of print media. • Make sure all cables that connect to the printer are correctly attached. Refer to the Setup Guide for more information. Before removing jams Remove any print jobs from any output bins before opening the upper front door to remove jams. 121